Charging Your Phone with a PC
1 Connect your phone to a PC or other device using a USB cable.
2 When the Use USB to dialog box is displayed on your phone, touch Charge only.
If another option has been set previously, the dialog box will not pop up. Swipe down from the
status bar to open the notification panel, touch Settings, then select Charge only.
Use Wireless Reverse Charging
Wireless reverse charging is supported by devices that support the Wireless Charging Standard,
such as phones, tablets, watches, and bands.
Before using wireless reverse charging, ensure that the battery level of your phone is higher
than 20%.
1 Go to Settings > Battery, and enable Wireless reverse charging.
2 Power on the device to be charged, and place it on the center of the back of your phone. Do
not place any metal objects between your phone and the device to be charged.
3 If the device does not start charging within 5 seconds, adjust its position and try again.
4 If the device to be charged is removed from the phone for more than 2 minutes during
charging, Wireless reverse charging will automatically be disabled.
Essentials
23
To Next Page
Loading...
