EasyManua.ls Logo

Hoonved HD 60 BT User Manual

Hoonved HD 60 BT
112 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
HD BT
LB BT
Istruzioni per l'uso e la manutenzione
Instructions for use and maintenance
Mode d'emploi et entretien
Gebrauchs - und Wartungsanweisungen
Instrucciones para el uso y el mantenimiento
Insturções para uso e manutenção
Ed. 07/2016
Question and Answer IconNeed help?

Do you have a question about the Hoonved HD 60 BT and is the answer not in the manual?

Hoonved HD 60 BT Specifications

General IconGeneral
BrandHoonved
ModelHD 60 BT
CategoryWasher
LanguageEnglish

Summary

Part 1: General description and safety device

General description and safety device

Overview of machine features, use, transport, and safety standards.

1.1 GENERAL DESCRIPTION

Overview of the machine's design, features, and hygiene standards.

1.2 TYPE OF USE AND IMPROPER USE

Guidelines on intended use, permitted agents, and avoiding misuse.

1.3 TRANSPORT, SHIPMENT AND STORAGE

Instructions for safe handling, shipping, and storing the machine.

1.4 INSPECTIONS ON ARRIVAL

Procedures for checking the machine and packaging upon delivery.

1.5 UNPACKING

Steps for removing packaging and ensuring safe disposal of materials.

1.6 MACHINE IDENTIFICATION

Locating the machine's data plate with serial number and model details.

1.7 DESCRIPTION OF THE SAFETY DEVICES

Details on built-in safety features like microswitches and reference standards.

1.8 REFERENCE STANDARD

Information on the standards the machine and its safety devices comply with.

Part 2: For the Operator

Particular Recommendations for the Operator

Essential instructions and warnings for safe and correct machine operation by the user.

CONTROL PANEL

Explanation of the control panel buttons, LEDs, and displays for machine operation.

2.1 WASHING PHASES HD/LB

Step-by-step guide to starting, selecting cycles, operating, and interrupting washing.

2.2 CLEANING

Instructions for daily cleaning, preventive maintenance, and descaling the machine.

2.3 PREVENTION MAINTENANCE

Instructions for checking and cleaning spray arms and nozzles for optimal performance.

2.4 DESCALING

Guidance on removing lime scale deposits to maintain hygiene and machine condition.

2.5 TEMPORARY STOPPAGE

Recommendations for preparing the machine for short-term inactivity.

2.6 DEMOLITION and DISPOSAL.

Procedures for safely scrapping and disposing of the machine's components.

2.7 SCHEDULED MAINTENANCE

Advice on performing regular maintenance every six months for optimal machine life.

2.1.i Break Tank System - HD/LB "BT"

Explanation of the Break Tank System's benefits for rinse phase stability.

2.1.1 Heat pump "HP2-HP3"

Description of the heat pump's function for energy saving and steam reduction.

2.1.I VACUUM STEAM THROUGH RCC

Details on the vacuum steam extraction phase using the RCC module.

SUMMARY TABLE of CYCLE LED CHECK SIGNALS

A table summarizing the meaning of different cycle LED check signal patterns.

SUMMARY TABLE of START BUTTON (S3)

A table illustrating the status of the start button based on machine state.

TROUBLESHOOTING

Common problems, their causes, and solutions for machine malfunctions.

Part 3: For the Technician

3.1 INSTALLATION

Guidelines for electrical, water, and drain connections, and setting up the machine.

DISPLAY ALARMS P3 and P2

Explanations of alarm codes displayed on the machine's interface.

3.2 DETERGENT DISPENSER (Optional)

Information on the automatic detergent dispenser and its setup.

3.3 FILLING THE RINSING AGENT DISPENSER

Instructions for filling and adjusting the rinsing agent dispenser.

Related product manuals