9
MAINTENANCE
Removing the battery
Emptying the dirt container
Lie the handheld on
its side on a flat stable
surface. Press the
battery release button.
Press the handheld
release clip. Pull to
separate the handheld
from the reach wand.
Slide the battery
out from the back
of the handheld.
The reach wand when
attached to the Powered
Head/accessory is not
free standing. Place
safely and securely
to one side.
Ensure the battery has been removed and hold
the handheld over a bin, press the dirt release
button to allow dirt/debris to fall out.
CAUTION: Always remove the battery from the vacuum cleaner before performing maintenance
or troubleshooting checks.
WARNING: Don’t over fill the dirt container to avoid blocking the air flow through the
vacuum cleaner.
To Next Page
Loading...
