Hoover Cruise Series - Using as a handheld vacuum cleaner

7
Using as a handheld vacuum cleaner
Always take extra care when using the vacuum cleaner on the stairs.
Press the handheld
release clip. Pull to
separate the handheld
from the reach wand.
The reach wand when
attached to the Powered
Head/accessory is not
free standing, place
safely and securely
to one side.
Choose an accessory
(pictures illustrated
dependent upon model).
Push the chosen
accessory into the
handheld until it
clicks into place.
All of the accessories including
the Powered Head can be attached
directly onto the handheld.
Squeeze the trigger and
push the ‘Continuous
power latch’ towards
the trigger. This will lock
it into the ‘On’ position
and will continue to
power the machine
without having to hold
in the trigger. Push the
latch away from the
trigger to unlock and
release the trigger.
Squeeze the trigger
located underneath the
handle, the machine will
switch ‘On’. The On/
Off and charging light
will illuminate green
indicating the power
is on and the machine
is charged. Release the
trigger to switch the
machine ‘Off’.
OPERATION