How to Replace
4.12
4.13
4.14
4.12 Slip brushrolls through belt. NOTE: Place belt
on rounded areas of brushrolls without brushes.
4.13 With belt in place, pull and slide brushrolls into
unit, making sure that the brushrolls end caps are
in the correct orientation.
4.14 Place new belt on motor shaft.
4.15 Replace belt cover. Secure by replacing all
screws.
IMPORTANT
Rotate brushrolls manually to make sure belt is
not twisted or pinched.
BELT OR BRUSHROLL: How to Remove and Replace
4.7
4.8
4.9
4.10
Belt: What to Buy
For Belt Style 29 replacements or to locate a
dealer nearest you, please call 1-800-944-
9200 or visit our website at www.hoover.com
How to Remove
4.7 Flip cleaner on its side to expose bottom of
cleaner.
4.8 To remove belt cover, use Phillips screwdriver
to remove the seven screws. Arrows show location
of screws.
4.9 Remove belt cover from unit. NOTE: Wheel is
intended to be removed with belt cover.
4.10 Pull both brushrolls towards user to remove
from unit.
4.11 Remove belt. Dispose of old belt.
CAUTION
! !
To reduce the risk of injury from moving parts,
unplug cleaner before servicing.
10
To Next Page
Loading...
