Hoover HF910P 011 - Cleaner Maintenance

9
7. CLEANER MAINTENANCE
7.1 EMPTYING THE DUST BIN
7. CLEANER MAINTENANCE
7.2 FILTERS
1 2 3 4
1 2 3 4 5 6
7 3 4 5
8 9 10
GB
When the debris in your dust bin reaches the max ll line, empty your bin.
1. Switch o your product.
2. Press the handheld release button and remove the handheld unit from the tube.
3. Hold the handheld unit over a bin and press the bin ap release button to open the ap and release
the debris into the trash.
4. Close the bin ap.
It is recommended to wash your lters after every 5 bin empties.
1. Ensure your product is switched o.
2. Press the bin release button and remove the bin assembly from the handheld unit.
3. Remove the pre-motor lters from the bin and separate the foam lter.
4. Remove the exhaust lter from the handheld unit.
5. Remove any excess debris from the lters and wash all 3 lters using lukewarm water.
6. Leave to dry for 24hrs before retting to your product.
7. Use the cleaning tool provided to remove any excess debris from inside the dust bin.
8. Re-t the foam lter to the pre-motor lter and re-t into the bin.
9. Re-t the exhaust lter to the handheld unit.
10. Re-t the bin to the handheld unit.