Chapter 3.4 - Vertical Steam Ironing
Set the soleplate temperature (12) to the max temperature and set the Multi-Steam
Technology selector (14) to the Profound care program.
Hang curtains and clothes (jackets, suits, coats). Hold the iron in vertical position
at a short distance of the fabric to avoid burning it. Press the steam trigger (13) to
steam iron moving it from top to bottom.
Warning: Do not direct the steam jet towards people or animals.
When the water tank is empty, the “Empty water tank” light (1b) is on. No more
steam escapes from the soleplate and steam ironing is no longer possible.
without exceeding the max mark level. Replace the water tank at its original place.
You can restart ironing immediately.
Please refer to chapter 2.2 for more detailed instructions.
The professional steam brush attached on your ironing system can be used to iron
in a vertical position to easily remove creases on delicate textiles, remove odours
such as smoke from textiles and refresh worn garments.
Switch on the appliance and when the steam ready LED lights up, the steam brush
is ready to use. Press the steam button on the brush to start cleaning.
Warning: Do not direct the steam jet towards people or animals.
Chapter 4: Maintenance and Cleaning
All the maintenance and cleaning operations have to be done when the unplugged
appliance has cooled down for at least 2 hours, to prevent any risk of burns.
Chapter 4.1 - Cleaning the Appliance
Do not use any detergent or descaling products for cleaning the soleplate. Regularly
clean it with a humid and a non-abrasive cleaner.
To clean the plastic parts of the stand, please use soft clothes.
Chapter 3.6 - Professional Steam Brush (Certain models only)
GB
To Next Page
Loading...
Need help?
General
