Hoover ONEPWR Blade Max - Cleaning the filter and separator

10
MAINTENANCE
Wash the filter under running water
(40°C max). Leave for at least 24hrs
or until fully dry before replacing.
24hr
40°C
MAX
CAUTION: Ensure both the
filter and separator are refitted
before use.
Cleaning the filter and separator
CAUTION: Always remove the battery before carrying out any maintenance or troubleshooting.
Push the tab on the lid of the dirt container and lift the cover to
access the filter.
Lift the filter and separator from the
dirt container.
Tap the separator over a bin to
remove dirt and debris and wipe over
the metal shroud with a dry cloth.
Pull the tab on the filter to remove
from the separator.
Tap the filter against the bin to
remove any dirt and debris.