11
MAINTENANCE
Cleaning and replacing the powered head brushbar
Pull the brushbar out from the
brushbar housing.
To remove any threads or hair, slide
the blade of a pair of scissors into the
groove on the brushbar and cut along
the groove.
Clear any dirt/debris from the end
caps and inside the housing of the
powered head.
Refit the brushbar into the floorhead. Align the arrow on the brushbar cover
so it points north, firmly push and twist clockwise to lock.
Using a coin, push and turn the brushbar lock anticlockwise to release
the brushbar.
Press the floorhead release button
to remove the floorhead from the
machine.
To Next Page
Loading...
