12
MAINTENANCE
Checking for blockages
To test for a blockage in the reach wand, drop a small
ball of paper into the wand. The paper will drop
through if the wand is clear. Use a broom handle or
similar blunt object to remove any blockage.
Press the handheld release button
and remove the reach wand. Check
and clear any dirt and debris from
the handheld connection point.
Press the dirt container release
button and remove the dirt container.
Check and clear any dirt and debris
from behind the dirt container flap.
Check the powered head for any
blockages and use a blunt object to
remove the blockage.
To Next Page
Loading...
