Hoover REACT - Page 17

17
Using your Vacuum to Clean Up High
Choose an accessory
(all accessories
not available on all
models).
Press the Powered Nozzle
Release Button and pull to
remove the Powered Nozzle
from the Reach Wand.
1 2
Push the chosen
accessory into the
Reach Wand until it
clicks into place.
TIP: The Reach Wand can
be used for hard-to-
reach places.
3
IMPORTANT
This vacuum cleaner is not free standing. In between uses or when carrying out any maintenance always
lie flat on the floor in a suitable location so it does not become a trip hazard or can be stepped on.