21
Maintenance: Cleaning the Filter, Dirt Cup and Separator
Remove the Reach Wand. Press the dirt
cup release button and pull the dirt
cup away.
To clean the separator, lift to remove. Clean
dirt & debris, then place back into dirt cup.
Pull the lter away and tap over a
trash bin to remove dirt. Rinse lter
under warm water until water is clear.
Allow lter to dry for 24 hours or until
completely dry before reinstalling.
To reassemble, align the hook to the
front. Push the dirt cup backwards,
until it locks in place.
1
3
2
4
WARNING
To reduce the risk of personal injury, remove battery
before maintaining or servicing your vacuum.
IMPORTANT
DO NOT USE SOAP OR OTHER CHEMICALS TO CLEAN. DRY FILTER COMPLETELY,
FOR UP TO 24 HOURS, BEFORE REINSTALLING INTO THE PRODUCT.
To Next Page
Loading...
