To Next PageTo Next PageWhat to do if the Hoover STREAMLINE FH46000V solution won’t dispense?
If your Hoover Ultrasonic Jewelry Cleaner isn't dispensing solution, ensure both tanks are securely locked in place. Also, check if the Clean Water Tank is empty; if so, refill it with water and solution.
What to do if Hoover STREAMLINE FH46000V leaves water puddles?
If water puddles behind your Hoover Ultrasonic Jewelry Cleaner, ensure the Clean Water Tank is securely locked in position. Also, check if the Dirty Water Tank is full and empty it if necessary.
Why Hoover STREAMLINE FH46000V Ultrasonic Jewelry Cleaner won’t run?
If your Hoover Ultrasonic Jewelry Cleaner isn’t running, make sure the power cord is firmly plugged into the outlet. Also, check that the power switch is turned on.
How to fix low suction on a Hoover STREAMLINE FH46000V?
If the Hoover Ultrasonic Jewelry Cleaner has low suction or won’t pick up, start by removing and emptying the Dirty Water Tank. Ensure that the tanks and their lids are correctly latched in place. Also, make sure the nozzle is properly attached and latched.
How to fix Hoover STREAMLINE FH46000V brushes that won’t rotate?
If the brushes on your Hoover Ultrasonic Jewelry Cleaner won’t rotate, turn the unit off first. Check that the brushes are correctly locked into place. Then, remove any debris stuck between the brushes.
General| Brand | Hoover |
|---|---|
| Model | STREAMLINE FH46000V |
| Category | Ultrasonic Jewelry Cleaner |
| Language | English |
