HOSE:Howto Clean
CAUTIONA
To reduce the risk of personal injury from moving parts, unplug vacuum
before servicing.
4.17 To remove hose for tool use, press the hose release button (A) and pull
hose end out.
Clear away debris or obstructions from hose. Do not use sharp objects to clean
out hose as they can cause damage. To lock back into place, push hose into
hose tube until you hear a click.
AIR-POWERED HAND TOOL:
Howto Clean
(Tool varies per model)
A CAUTIONA
To reduce the risk of personal injury from moving
parts, unplug vacuum before servicing.
Not to be used for grooming a pet.
4.18 Turn tool so bottom faces up. Rotate the
latches (A) on either side of tool.
4.19 Remove bottom plate (B).
4.20 Remove any debris and/or hair from brushroll.
Replace bottom plate by aligning tabs along front
edge of tool. Rotate latches back into locked
position.
HEADLIGHT:Howto Replace
available on select models only)
A WARNINGA
To reduce the risk of electrical shock, unplug
vacuum before cleaning or servicing.
RemovingLens
Press Handle Release Pedal and place handle in
low position.
4.21 Using a Phillips screwdriver, remove (2)
screws as shown and lift off lens.
InstallingBulb
4.22 Pull old bulb straight out of socket. Push new
bulb straight into socket until locked in place.
Do not use excessive force when installing bulb.
Do not twist or turn bulb when installing bulb.
ReplacingLens
4.23 Reposition lens and secure with screws.
iii!i!i!i!!ii ii i i!dliiiiiiilJi!i ii il!i!___i_!_______!_!_!____!_________ii____ii_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_ii_ii_ii_ii_i__ii!_
13 Actual model may vary from images shown.
To Next Page
Loading...
