To Next PageTo Next Page
Need help?Do you have a question about the hopf Elektronik GmbH 8030HEPTA/GPS and is the answer not in the manual?
General| Manufacturer | hopf Elektronik GmbH |
|---|---|
| Model | 8030HEPTA/GPS |
| Category | Server |
| Type | Time Server |
| Synchronization | GPS |
| Operating Temperature | 0°C to +50°C |
| Time Synchronization Protocol | NTP |
| GPS Receiver | Integrated |
| Output Signals | IRIG-B |
| Ethernet Ports | 2 |
| Power Supply | 100-240V AC |
| Mounting | 19" Rack |
| Dimensions | 1U |
Details the 1U/84HP 19-inch rack housing specifications.
Explains the function of front panel elements like LCD, LEDs, and buttons.
Presents a block diagram illustrating the functional groups and their interrelations.
Describes the boot process of the Time Server after power-on or reset.
Explains the NTP adjustment process and time synchronization accuracy.
Details the functions triggered by the Reset-(Default) button based on press duration.
Covers the installation of the system within its 1U Slim Line housing.
Details the connection of the GPS antenna to the Time Server.
Explains how to connect the LAN interfaces ETH0 and ETH1.
Provides a step-by-step overview of the general commissioning process.
Details the functions of the pushbutton, including backlight activation and scrolling.
Describes the elements and information presented in the standard display image.
Explains how general errors are indicated and recommended troubleshooting steps.
Provides a brief overview of basic WebGUI operation and initial setup.
Provides an introduction to accessing and using the WebGUI.
Explains user login and logout procedures, including user types and password rules.
Details network settings including hostname, DNS, gateway, and interface configuration.
