Need help?Do you have a question about the Horizon Fitness SQ3TS and is the answer not in the manual?
General| Brand | Horizon Fitness |
|---|---|
| Model | SQ3TS |
| Category | Industrial Equipment |
| Language | English |
Steps for positioning and setting up the trailer at the job site.
Steps to remove the trailers from the job site in reverse order of setup.
Provides dimensions for the SQ3TS trailer in its operating position.
Provides dimensions for the SQ3TS trailer in its transport position.
Overview of components housed within the controller cabinet.
Details the different modes and capabilities of the Horizon Signal system.
Explains the function and programming of the controller.
Explains the SRM6220 Data Radio, its indicators, and ports.
Details the Morningstar ProStar 30 solar charge controller.
Describes the circuit board and its fuse layout.
Explains the RMS functionality, reporting, and setup.
Describes the micro-terminal's function and connection.
Overview of common screens displayed on the micro-terminal.
Explains how to navigate and use the SYSTEM menu.
Process for assigning unique identities to controllers in the system.
Steps to designate radios as Master or Slave and set channels.
Introduces the home screen and micro-terminal button functions.
Guides the user through creating a basic program using templates.
Explains how to choose and use simple program templates.
Guides on creating custom programs with advanced control.
Steps to create a pre-emption program using special programming.
Examples of programming intersection scenarios with specific features.
How to program pedestrian crossings using special programming.
How to save, load, edit, and delete programs in memory.
How to set and use the system clock for synchronization and logging.
How to change signal operation modes like Automatic, Manual, Flash, etc.
Configuration settings for language, signal sequence, timeouts, etc.
How the conflict monitor ensures safe operation and lists possible faults.
How the data logger records system events and errors.
Overview of the wireless module for connecting to NEMA controllers.
Step-by-step guide to setting up the wireless interface system.
Describes methods for manual operation: hard-wired, wireless remote, micro-terminal.
Instructions on how to charge the system's batteries.
Details the battery box, breaker, and fuse panel.
Maintenance procedures for the trailer axle and wheel assembly.
Inspection and replacement of trailer lights and wiring.
Inspection and replacement of the trailer coupler and tongue.
Checking for hydraulic fluid leaks and fluid levels.
Inspecting mounting bolts, LEDs, doors, and wiring of signal heads.
Inspecting solar panels, wiring, and connections.
Checking tire pressure, damage, and lug nut tightness.
Wiring diagram for the 7-pole molded trailer RV cord.
Details the ASIM Doppler Sensor for detecting vehicle motion.
Explains the video detection system and its setup.
Setup for the pre-emption system that reacts to emergency vehicle lights.
Lists various optional add-on components for specific job requirements.
Module allowing pilot car driver to operate the signal remotely.
Details pedestrian signals, their standards, and features.
RMS reports location, battery, and failures via email/text.
Adds an additional overhead light for flexible placement.
Backplates enhance visibility of LED signal indications.
Additional signal head for perpendicular angle indication for haul roads.
Additional phases with turn arrows for dedicated turning lanes.
Discusses hardwire and wireless radio communication options.
Lists and illustrates various cables and receptacles with part numbers.
Lists controller cabinet and backplate parts.
Lists hydraulic cylinder, hoses, pump, and mounting pins.
Lists various light components like brackets, visors, and signal heads.
Lists batteries, cables, and battery chargers.
Lists components for the mast extension and assembly.
Lists trailer tow bars, safety chains, and stabilizer jacks.
Lists solar panels, brackets, and frame pins.
Lists controllers, micro-terminals, cameras, sensors, and decals.
Lists antenna bases, radios, nipples, and cables.
Describes common error messages and their recommended solutions.
Details circuit board pin assignments and connections.
Wiring diagram for the standard lower junction box.
Wiring diagram for the standard upper junction box.
To Next Page
