Horizon Hobby BLADE ZEYROK BLH7300 User Manual (English)

Questions and Answers:

S
Scott JacksonAug 13, 2025
Why is it difficult to bind my Horizon Hobby Drones?
- R
  Richard MooreAug 13, 2025
  If you're having trouble binding your Horizon Hobby Drone, the transmitter might be too close to the aircraft. Power off the transmitter, increase the distance between them, disconnect and reconnect the flight battery to the Quadcopter, and then follow the binding instructions. Alternatively, ensure the bind switch or button is held while powering on the transmitter and repeat the binding process. Also, move the quadcopter and transmitter away from large metal objects, wireless sources, or other transmitters before attempting to bind again.
F
fowlerallenAug 17, 2025
Why does my Horizon Hobby Drone have reduced flight time?
- D
  David DuranAug 17, 2025
  If your Horizon Hobby Drone has reduced flight time or seems underpowered, first, completely recharge the flight battery. If that doesn't solve the problem, try using a different power source for the charger. It's also possible that the flight battery is damaged, in which case you should replace it, following the battery instructions. Lastly, ensure the battery is warm (room temperature) before use, especially in cold flight conditions.
M
Michelle HuynhAug 21, 2025
What to do if Horizon Hobby Drone has difficulty connecting after binding?
- B
  Brady VillarrealAug 21, 2025
  If you're experiencing difficulty connecting your Horizon Hobby Drone after binding, ensure you wait at least 5 seconds between powering on the transmitter and the quadcopter. If using a ModelMatch™ transmitter, select the correct model memory. Also, check and replace or recharge the flight battery or transmitter batteries if their charge is too low. Finally, move the quadcopter and transmitter away from large metal objects, wireless sources, or other transmitters and try connecting again.
S
Samantha MartinezAug 25, 2025
What to do if Horizon Hobby Drone will not respond to throttle?
- S
  Shaun CisnerosAug 25, 2025
  If your Horizon Hobby Drone isn't responding to the throttle, reset the controls by ensuring the throttle stick and throttle trim are at their lowest settings. Also, make sure that the aileron, elevator, and rudder trims are centered.
C
Carolyn WhiteAug 28, 2025
Why does Horizon Hobby Drone crash immediately upon lift-off?
- J
  Jimmy ThomasAug 28, 2025
  If your Horizon Hobby Drone crashes immediately upon lift-off, ensure the propellers are in the correct locations and that the motor direction is correct. Also, check that the aileron, elevator, or rudder are not reversed in the transmitter.
B
Beth LopezAug 31, 2025
How to fix Horizon Hobby Drone propeller that won't spin?
- S
  Sean KellySep 1, 2025
  If the propeller of your Horizon Hobby Drone will not spin or spins roughly, replace the affected drive gear if it is stripped. If the drive gear is not stripped, adjust the pinion gear mesh.
D
Dwayne ClarkSep 4, 2025
What to do if Horizon Hobby Drone smells burnt and doesn't function?
- A
  Andrew BrewerSep 4, 2025
  If your Horizon Hobby Drone doesn't function and smells burnt after connecting the flight battery, it's likely that the flight battery was connected with the wrong polarity. Replace the 3-in-1 board and connect the flight battery, being careful to note the proper polarity.
E
Erin BrownSep 9, 2025
What to do if Horizon Hobby Drone does not complete initialization?
- J
  Jonathan ChaseSep 9, 2025
  If your Horizon Hobby Drone does not complete initialization, allow the quadcopter to sit still until it initializes completely.

Horizon Hobby BLADE ZEYROK BLH7300 Specifications

General

Type	Quadcopter
Product Code	BLH7300
Brand	Blade
Stability Mode	Yes
LED Lights	Yes
Ready-to-Fly	Yes
Channels	4
Motor Type	Brushed
Skill Level	Beginner
Battery	3.7V LiPo
Transmitter	Included