13
Ceramic honing disc
After sharpening with the diamond
grinding disc, the ceramic honing disc
refines the result significantly. Just a few
rolls back and forth suffice.
Planetary gearing
Equipped with internal planetary gearing, a single roll of the sharpener turns the
grinding disc three times. This means that the process is performed three times faster.
Due to the gearing, the must be gripped firmly and rolled with care.
Diamond grinding disc
The industrial diamonds we use are suitable
for efficiently sharpening knife steels of any
hardness without needing water.
Properly used
diamond grinding
discs should not need replacing. With a
grit size of 46 μm our standard disc grinds
efficiently and precisely. A high-quality
sharpening result is quickly achieved.
To Next Page
Loading...
