1. key
2.
4/Fig. 4
Press the 3. key button.
light signals are emitted.
Enter the new 4-digit access code via the 4. numerical keys.
Press the 5. key button.
Enter the new 4-digit access code again. 6.
Press the 7. key button.
NOTE:
A radio code which has been assigned a memory location number is retained even
Transmitting after entering an access code5.1
Instructions on entering the access codes for operating functions:
last 4
mistake can be terminated and you can then start again.
Enter the valid access code using the 1. numerical keys.
Press the 2. key button.
14
TR20A004-C / 08.2009
ENGLISH
To Next Page
Loading...
