TROUBLESHOOTING
2. Check whether the lifting rod is installed normally. If it is not stuck or the bayonet is damaged
The water inlet valve has a water replenishing function. The siphon toilet is designed to meet the
water seal requirements by replenishing water. This kind of water seepage generally only lasts for a
few minutes, so it is normal for water seepage during the water inlet process.
unsealed and cause water leakage.
drain valve.
resulting in water seepage.
Check whether the drain valve is installed in place: the screws are not tightened, the sealing pad and
Check whether the installation hole of the drain valve is deformed or cracked, causing water leakage
due to inability to seal.
Water keeps leaking into the bowl of the toilet
1.
2.
3.
4.
5.
6.
leakage; the toilet will be turned upside down to drain the water, but 100% drainage cannot be
guaranteed.
1. Check whether the installation of the sewage outlet is misplaced
2. Look for cracks: cracks in sewage outlets, cracks in pipes, and other cracks
3. Check whether there is water leakage at the bottom ventilation hole
Water leaking from the outside of the toilet
There is a small amount of water stains in the water tank or packaging box
The sewer pipe is not smooth. (Sewer pipes, toilet pipes are clogged, sewer pipes have S bends, etc.)
The sewage outlet of the toilet deviates from the sewage pipe, blocking the sewage outlet and
Adjust the water inlet volume of the water inlet valve.
Adjust the drainage volume of the water drain valve.
1.
2.
3.
4.
5.
1-209-200-8033 (US) Mon-Fri 6am - 11am (PST)
suppo@horow.com
General