Need help?Do you have a question about the Hoshizaki KM-1301SWJ/3 and is the answer not in the manual?
General| Condenser Type | Air-Cooled |
|---|---|
| Refrigerant | R-404A |
| Voltage | 208-230V |
| Frequency | 60 Hz |
| Ice Style | Crescent |
| Phase | 1 Phase |
Details construction of air-cooled, water-cooled, and remote models.
Covers single and stacked bin control configurations.
Illustrates circuit diagrams for different model types.
Explains operational flow, including fill, harvest, and freeze cycles.
Guides on diagnosing electrical systems and components.
Procedure for checking and diagnosing the control board.
Steps to check the bin control proximity switch function.
Procedures for checking and cleaning the float switch.
Steps to test the thermistor resistance and function.
Tables listing possible causes for production issues.
Checklist for diagnosing freeze-up, leaks, or low charge.
Diagram and explanation of the "J" control board components.
Explains LED indicators and audible alarms for safety conditions.
Details default dip switch settings for control boards.
Configuration of harvest and pump-out timers via dip switches.
Settings for pump-out frequency and harvest pump assist time.
Dip switch settings for harvest pump time and freeze-time correction.
Dip switch settings for freeze timer and float switch selection.
Dip switch settings for minimum harvest time and anti-slush control.
Guidelines for working with the refrigeration system and components.
Procedures for brazing, evacuation, and recharging the refrigerant system.
Notes for replacing specific components like compressors and motors.
Procedure for adjusting the water regulating valve on water-cooled models.
Recommended maintenance tasks and frequency for the icemaker.
Steps to remove water from the icemaker supply line.
Instructions for draining the icemaker's water tank.
Procedure for removing water from water-cooled condensers.
Detailed specifications and performance data for various KM models.
Wiring diagrams for single-phase KM models.
Wiring diagrams for three-phase KM models.
To Next Page