Need help?Do you have a question about the Hoshizaki KM-500MAH and is the answer not in the manual?
Electrical and refrigeration specs for the KM-500MAH (Air-cooled) model.
Electrical and refrigeration specs for the KM-500MWH (Water-cooled) model.
Electrical and refrigeration specs for the KM-500MRH (Remote Air-cooled) model.
Physical dimensions and connection points for the KM-500MAH model.
Physical dimensions and connection points for the KM-500MWH model.
Physical dimensions and connection points for the KM-500MRH model.
Essential checks to perform before installing the icemaker unit.
Step-by-step guide on removing various panels of the icemaker for access.
Recommended placement and environmental conditions for optimal icemaker operation.
Procedures for setting up the icemaker and making safe electrical connections.
Initial checks required before installing the remote condenser unit.
Guidelines for positioning the remote condenser unit for optimal performance.
Procedures for setting up the remote condenser unit, including tubing and connections.
Instructions for making the electrical connection for the remote condenser unit.
Guidelines for stacking condenser units, if applicable.
Details on connecting water supply and drain lines to the icemaker.
A comprehensive checklist to ensure proper installation and readiness before operation.
Step-by-step guide for the initial startup and operation of the icemaker.
Instructions on how to prepare the icemaker for extended periods of non-use.
Detailed steps for cleaning the icemaker unit, including scale removal.
Steps for sanitizing the icemaker to ensure hygiene and prevent contamination.
Guidelines for regular maintenance tasks to keep the icemaker in optimal condition.
To Next Page
General