Hotec K Series User Manual

Quick Start Guide
For Hotec K Series Wireless Microphones
Thanks for purchasing Hotec K Series Wireless Microphone. Please read through this user
manual carefully before use.
SYSTEM COMPONENTS
K25
Recever x 1
Bodypack transmitter x 2
Headset microphone x 2
Power adapter x 1
Mic cable (1/4” to 1/4”) x 1
Lapel lavalier microphone x 2
USB charging cable x 2
K25
K26
K26
Receiver x 1
Handheld microphone x 2
Power adapter x 1
Mic cable (1/4” to 1/4”) x 1
AA battery x 4
Hotec
®
is the registered trademark of Shenzhen Tecson Trade and Technolgy Co., Ltd.
K26

Hotec K Series Specifications

General

Brand	Hotec
Model	K Series
Category	Microphone
Language	English

Summary

PREPARATION BEFORE USE

OPERATION GUIDE

K26: Single system operation instructions

Instructions for setting up and operating a single K26 wireless microphone system.

K26: Multi systems operation instructions

Steps to avoid interference when using multiple K26 systems simultaneously.

K25: Single system operation instructions

Instructions for setting up and operating a single K25 wireless microphone system.

K25: Multi system operation instructions

Steps to avoid interference when using multiple K25 systems simultaneously.

TROUBLESHOOTING

No sound or faint sound

Troubleshooting steps for issues with no sound or faint sound from microphones.

Distortion or unwanted noise bursts

Resolving distortion or unwanted noise bursts in wireless microphone audio.

Transmitter power or distortion issues

Addressing gradual distortion or failure to turn on microphones or transmitters.

Operation range is too short

Troubleshooting tips for a short operating range with wireless microphones.

Frequency lock issue on receiver

Troubleshooting when the receiver frequency fails to update with transmitter changes.

Microphone care