A
Ana WolfeSep 8, 2025
Why are my dishes streaked after using my Hotpoint Ariston Dishwasher?
- TTracy Jones MDSep 8, 2025
If your dishes have streaks or a bluish tinge, it could be that the rinse aid dosage is too high.
Why are my dishes streaked after using my Hotpoint Ariston Dishwasher?
If your dishes have streaks or a bluish tinge, it could be that the rinse aid dosage is too high.
Why aren't my dishes drying properly in my Hotpoint Ariston LTF 11S112?
If your crockery isn't drying well, consider these possibilities: * You might have selected a wash cycle without a drying program. * The rinse aid might be used up, or the dosage could be too low. * The rinse aid dispenser setting might not be high enough. * The crockery could be made from non-stick material or plastic.
What to do if the door of my Hotpoint Ariston LTF 11S112 won’t close?
If the door won’t close, it might be that the lock was released. Strongly push the door until you hear a “clacking” noise.
What to do if Hotpoint Ariston Dishwasher beeps and does not take in water?
If your Hotpoint Ariston dishwasher doesn't take in water and you hear beeps with an 'H' on the display (or the ON/OFF light flashes with a '6' on the display), here's what you can do: * First, ensure that there is water in the mains supply. * Turn on the tap. The appliance should start after a few minutes. * If the appliance lock has activated due to inaction after the beeps, switch off the machine using the ON/OFF button, turn on the tap, and switch the machine back on after a few seconds by pressing the same button. Reprogram the appliance and restart the wash cycle.
Type | Freestanding |
---|---|
Appliance placement | Freestanding |
Number of Washing Programs | 6 |
Delay Start | Yes |
AquaStop function | Yes |
Adjustable feet | Yes |
Connected load | 1900 W |
Current | 10 A |
Outlet hose length | 1.5 m |
Drying Efficiency Class | A |
Number of Place Settings | 11 |
Dimensions (H x W x D) | 850 x 450 x 600 mm |
Washing programs | Eco, Intensive, Normal |