Loading and using the washer.
Always follow fabric manufacturer's core label when laundering
WashLoads
Sort by co!or (whites,lights, colors),soillevel,fabric
type(sturdy cottons, easy care, delicates)and
whether the fabric produces lint (terry cloth, chenille)
or collects lint (velveteen,corduroy).
www.Hotpoint.com.
- Fire Hazard
Neverplace items in the washer that are dampened with gasoline or other flammable liquids.
Nowasher can completely remove oil.
Donot dry anything that has ever had any type of oil on it (including cooking oils).
Doingsoso can result in death, explosion,or fire.
Pro ent
Add detergent before adding items so that the
detergent can work effectively. Usingtoo little or
too much detergent is a common cause of laundry
problems.
Forspots, apply pre-treatment to items as
recommended on the product label. Application
should be made in the basket to prevent overspray
which may cause the coloring on the lid or graphics
to fade.
Youcan use lessdetergent if you have soft water, a
smaller load or a lightly soiled load.
When using high efficiency or concentrated
detergents, consult the product labelto determine
amount required for optimum performance.
Excessivedetergent will negatively impact wash
performance.
Loa i ems,oose, in W en
_ v loading wet items,make sure you set the load/water
v, level high enough to allow the items to move freely.
Water level shouldjust cover the items.Toadd items
after washer has started, lift the lid and submerge
additional items next to the agitator.
[] Donot wrap long items likesheets or pants around
the agitator.
[] Donot wash fabrics containing flammable
materials (waxes,cleaning fluids,etc).
[] Washer will not agitate or spin with the lid up,
however the timer will continue to run.
To Next Page
Loading...
