Hotpoint HDA100 - Specific Cycle Operations

About thedial cycles.
Rinse& Hold (H_A750,HDAISO,HDA200,HDA300,HDA330,
HDA900andHDA930only)
For rinsing partial loads that will be',_ashed later. Do not
use detergent,
#Make sure HEATEDDRYOFFisselected.
#i#ii
sure the door is unlatched
to RINSE& HOLD.
Al_atch the door to start the cycle
Start _elsJ! (HDAgO0andHDA930only)
The STARTDELAY_ll allow }ou to delay the start
time of any (y(le not on the Dial automati(:all} tbr up
to 6 hours.
........ _,_,_=,_ _Select the wash c_(le and ( )ption "_ou",_ant.
_Slo',dy turn the ]Dialto desired time. The CYCLEON
light will come on.
_ _ OfF OH
Plate Wsrmer (HDA200,HDA300,HDA330,HDAgO0and
HDA930only)
For warming (lean dishes and se_,'ing plates. This (y(le
will take approximately 32 minutes.
......... _....... ::_Select HEATEDDRYON.
iii!
to PLATEWARMER.
10