HOW TO
C~NGE
COLOR PANELS
If you are
redecorating,
you can
change
your dishwasher’s
front panels
to match or
blend with
your new colors.
The panel is
held in
Place
by
the doo; trim
aid
the trim on the panel below the door.
Each side of each panel is a different color. Or you can
paint a panel with the
color of your own choice.
NOTE: Do not operate the dishwasher while changing
panels or when lower access panel is removed.
How to change door panel insert:
1. Take out trim screws on either side
of the dishwasher door. Remove the side trim.
2. Slide out the insert panel.
3. Put the color you want in front.
(Careful—edges may be sharp).
4. Replace the insert panel, side trim and screws.
How
to
change lower panel insert:
1. Remove panel attachment screws.
2. Remove the entire panel.
3. Take out screws and remove the top trim.
4. Slide out the insert panel.
5. Put the color you want in front.
6. Replace the insert panel, top trim and screws.
7. Replace the entire panel and attachment screws.
A wood panel trim kit contains trim and instructions
for adding a decorative wood door panel and lower
access panel no thicker than 1/4” to match kitchen
cabinets. The kit is available at no extra cost. (Specify
GPF40).
Order from:
GE Appliances
c/o
Dri-View
Manufacturing
4706
Allmond
Ave.
Louisville, KY 40209
12
To Next Page
Loading...
