To Next PageTo Next Page
Need help?Do you have a question about the Hotpoint WMD 942 P and is the answer not in the manual?
General| Load Capacity | 9 kg |
|---|---|
| Spin Speed | 1400 rpm |
| Energy Rating | A+++ |
| Wash Programs | 16 |
| Type | Freestanding |
| Loading type | Front Loading |
| Colour | White |
| Weight | 70 kg |
Covers removing transit packaging and ensuring the machine is stable and level.
Details connecting the appliance to power and water supplies correctly.
Instructions for connecting the drain hose to the waste pipe or sink.
Guidelines for connecting the appliance to the mains electricity supply safely.
Procedure for running the initial wash cycle before normal use.
Specifications and measurements of the washing machine model.
Explains the function of each button and indicator on the control panel.
Details the information shown on the digital display and indicator lights.
Outlines the process from switching on to unloading laundry.
Lists available wash cycles, their descriptions, temperatures, speeds, and load capacities.
Describes additional functions like Super Wash, Reduced Creases, and Eco Wash.
Explains how to use the detergent dispenser for powder and liquid.
Guidance on sorting, checking garments, and maximum load weights.
Details specific cycles like Fastwash, Silk, Curtains, and Wool.
How the machine balances loads and what to do if it doesn't.
Essential safety advice for using the washing machine.
Instructions on how to safely dispose of the machine and its packaging.
Procedure for opening the door manually in case of power failure.
How to safely turn off water and electricity before maintenance.
Methods for cleaning the exterior and interior of the machine.
Steps to remove and clean the detergent dispenser drawer.
Advice on maintaining the door and drum to prevent odours.
Information on cleaning the pump and checking the water inlet hose.
Solutions for when the washing machine fails to power on.
Troubleshooting steps for when the wash cycle does not begin.
Addresses problems with the machine not filling with water.
Diagnosing issues with constant filling or draining of water.
Solutions for when the machine fails to drain or spin.
Troubleshooting poor wash results or lack of heating.
Explains why programme times may vary or change.
Solutions for significant vibration during the spin cycle.
Addresses common causes of noise during operation.
Diagnosing and resolving issues with the spin cycle not working correctly.
Troubleshooting water leaks originating from the detergent dispenser.
Addressing leaks from parts of the machine other than the dispenser.
Interpreting rapidly flashing indicator lights on the control panel.
Tips for resolving unpleasant smells from the washing machine.
Solutions for when the machine door cannot be opened.
Explains normal drainage from the door seal.
Troubleshooting when the water level appears too low during washing.
Causes and solutions for too much foam in the wash.
Diagnosing why the machine turns off during or before a cycle.
General advice and common operational observations.
Details the 12-month parts and labour guarantee coverage and conditions.
Information on activating the free 5-year parts warranty.
Details on available repair protection plans for longer coverage.
Information on accessing free advice and assistance for technical issues.
Key contact numbers and website for Hotpoint service.
Information on ordering genuine replacement parts and accessories.
How to register the appliance to activate the 5-year parts guarantee.
Information on environmentally responsible recycling and disposal.
