EasyManua.ls Logo

Hott CD611T - Page 12

Hott CD611T
13 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 12 -
-Display:playback begins with the first programmed file or track
2 End playback of the track memory With >><<.
3 To play the track memory again, press >>MODE<< and afterwards >> <<.
Deleting the track memory
1In Stop mode,press or open the CD compartment.
Note:
The track or file memory is also deleted if the mains adapter is disconnected or if
the batteries are removed from the device.
Digital anti-shock system(DAS)
The anti-shock system reads the data on the CD-DA 40 seconds in advance (or 120
seconds in MP3 mode). DAS ON=memory used for reducing battery consumption
(CD stops after a while ).DAS OFF=optimum anti-shock performance,memory is
constantly loaded. You cannot switch off the antishock system in MP3 mode.
press >>ASP<< to switch the anti-shock system on or off.

Related product manuals