9.4 SPECIAL TOOLS (Continued)
WRVi 321 Compressor Tools Part No.
Jacking Plate for Rotor Removal when using a 32919J
Hydraulic Jack
Extractor for Balance Pistons 32920J
Extractor for Inlet Balance Piston Sleeve and 32921J
Mechanical Seal
Locknut Spanner for Piston – (WRVi321 Only) 32922J
T-Screws for Extraction purposes 5/8” UNC 32924J
T-Screws for Pulling Piston to Off Load Positions 32993J
Extractor Tool for Balance Piston Sleeves 32949J
Extractor Tool for Piston 32927J
Thrust Bearing Assembly Tool 32928J
Journal Bearing Assembly and Withdrawal Tool 32929J
Jacking Screws for Thrust Housings 32994J
Locknut Spanner for Coupling 32995J
Locknut Spanner M60 32948J
WRVi365 Compressor Tools Part No.
Jacking Plate for Rotor Removal when using a 365WP
Hydraulic Jack
T- Screw for Balance Pistons – M10 32999J
T-Screw for Actuator Piston – 3/8” UNC 32784J
T-Screw for Actuator Piston – 1/2” UNC 32993J
T-Bar Jacking Tool – M16 Housings & Covers 510019J
M45 Socket – Valve Locknut 33183J
Locknut Spanner - Actuator Piston 360001J
Actuator Piston Extractor Tool 32927J
Balance Piston Sleeve Tool 32949J
To Next Page
Loading...
