1-2-12 Saiwaicho, Naniwa-ku, Osaka 556-0021, Japan
Tel : +81-6-6567-3111 F a x : +81-6-6562-0024
INSTRUCTION MANUAL
PEDAL TAP
C-401/401-B
Specifications
Daily care
Remove the cut scrap from taps after use. Store avoiding shocks.
12.03
Operation
Check stamps on the bodies.
RH…Use for the right pedal.
L H…Use for the left pedal.
１
Use a tap handle on the
market which corresponds to
the square portion of the
shank of 9 mm for turning
these taps.
２
These taps are for
correcting the threads on
bicycle pedals. Do not use
for any other purpose.
Precautions
1. Be careful in handling, since these are precision cutting tools. Do
not drop or throw down. This could damage these taps.
2. Do not use when cracks, breaks, excessive wear or deformation
is found on this tap.
3. Always apply cutting oil when use.
Caution
RH means the right screw.
L H means the reverse screw.
1. Do not cut all at once since the threads are tapered.
Work gradually checking the fitting to the pedal.
2. Always apply cutting oil when use.
Caution
BC9/16X20
Applicable
bottom bracket
Weight 170 g
BC1/2X20
C-401
C-401-B
A pair of RH・LH
*
*
*
To Previous Page
Loading...
