Hozelock Pro Series - Spares and Accessories; Available Parts and Kits

Issue Problem Solution
Leaks Build up of
sediment
or foreign
matter on
sealing
surfaces
Check ‘O’-rings and seals
are free from dirt – Clean or
replace if required
Worn or
damaged
‘O’ rings or
washers
Check ‘O’-rings and seals are
free from wear or damage –
replace if required
Handle
rises
Faulty non
return valve
This stops the compressed air
in the container from escaping
back into the pump
If faulty, the pump handle
will rise when the container
is pressurised. To remove the
valve, lift the edge and pull
(NB take care not to damage
the sealing face of the barrel.
Replace with a new valve by
pushing firmly over the centre
hole)
Spares and Accessories
5
10
8
1
7 3
6
4
1
Complete pump assembly (Viton™) - Part No. 4128
2
Angled outlet adaptor assembly (Viton™) - Part No. 4131
3
Pressure release valve assembly (Viton™) - Part No. 4132
4
Reinforced 2m hose (PVC) - Part No. 4099
5
Trigger assembly (Viton™) - Part No. 4135
6
Strap assembly - Part No. 4136
7
Telescopic lance assembly (Viton™) - Part No. 4107
8
Weedkiller cone with fanspray angled head assembly
- Part No. 4112
9
Annual service kit - Part No. 4126
10
Replacement nozzle kit (jet and fan) - Part No. 4133
Please go to www.hozelock.com for details of spares and
accessories available.
Consumerhelpline:01213131122