Cable Management Bracket kit 28
Cable Management Bracket kit
About this device
The HP Cable Management Bracket kit assists with cable management and is designed for use with all HP
racks.
Kit contents
Item Quantity
1U cable management bracket
1
2U cable management bracket
1
Cable management D-ring bracket
clips
10
Cable management D-ring bracket
clamps
10
Cross-over brackets
2
12.7-cm (5-in) hook-and-loop cabling
strap
10
20.3-cm (8-in) hook-and-loop cabling
strap clips
10
M6 cage nuts
11
M6 x 16-mm Torx screws
11
M5.5-mm x 10-mm Torx screws
9
1/4 turn plastic latches
6
Extra hardware might be included for your convenience.
Required tools
The following tools are required for installation:
• T-25 Torx driver
• Cage nut insertion tool (included with your original rack hardware kit)
To Next Page
Loading...
