Rack Air Duct kit 87
— Draw latch assembly (1)
— Plastic push fastener (4)
— 510-mm foam gasket (2)
— 520-mm foam gasket (2)
o Lower air duct assembly (1)
— M5.5 self-tapping screw (4)
o M3.5 self-drilling screw (2)
o M10 x 25 bolt (2)
• Baying gaskets
o 876-mm foam gasket (2)
o 1850-mm foam gasket (2)
AF029A HP 10642G2 Top Exhaust Field Retrofit Kit
• Top rack plate
• Base rack plate
o Base plate (2)
o Egress slot plate (2)
o M5.5 self-tapping screw (4)
o 6-mm plastic push fastener (2)
o 10-mm plastic tree fastener (2)
• Solid rear rack doors (2)
• Airflow rail foam gasket (2)
• 600-mm plastic floor gasket (1)
AF030A HP 10642G2 Top Exhaust Rack
Factory custom-to-order HP 10642G2 rack with a solid top rack plate and a solid bottom rack plate
Required tools
The following tools are required for installation:
• T-25 Torx driver
• T-30 Torx driver
• Adjustable wrench or 17-mm wrench
• Scissors
• Electric drill
• 2.38-mm (3/32-in) drill bit
To Next Page
Loading...
