HP 1020 Series - Remote Access and PIN Code

hp fax 1020 series
30
Listening to Messages Remotely
You can pick up your messages from any touch tone telephone using your
PIN (personal identification number) Code. Select a 3-digit number that you
will remember.
Important!
If you want to access your TAM remotely, you must change the
PIN Code from the default *000.
Establishing your PIN code
1Press Menu.
1:Fax Functions will display.
2Press 6.
6:TAM Setup will display.
3Press Enter.
1:Message Length will display.
4Press 3.
3:PIN Code will display.
5Press Enter.
Pincode: *000 will display.
6 Type a new 3-digit code (for example, 487) and press Enter.
7Press Cancel repeatedly to exit the menu.
Cancel
Menu
Enter
Options/Volume