Note:
You will not be able to complete the following steps if you have not collected all of this
information.
Details
At various points during the configuration you will be queried for the following information:
z
DNS Domain name [ex. domain.com]
z
NIS Domain name [ex. hpcluster]
z
Network Connectivity:
{
Information on which network cards in each Compute Node connect to
the Management Server
{
Information on which network card in the Management Server
connects to the Compute Nodes.
z
MySQL root password (You will be asked to set it).
z
HP SIM Administrator password (You will be asked to set it).
z
LSF Administrator password (You will be asked to set it).
Back to Top
Step 2 Install Prerequisites
Background
ClusterPack works on HP Integrity Servers running HP-UX. In order to install ClusterPack, you must ha
the Technical Computing Operating Environment (TCOE) version of HP-UX installed. You must also h
the Ignite-UX software, which is used for installation. Installing Ignite-UX on the Compute Nodes make
ossible to create and distribute "golden images" from the Compute Nodes.
ClusterPack requires a homogeneous operating system environment. That is, all Compute Nodes and the
Management Server must have the same release of HP-UX installed as well as the same operating
environment.
Overview
Install the following software on the Management Server.
z
HP-UX 11i Ignite-UX
z
HP-UX 11i V2.0 TCOE
Install the following software on each Compute Node.
To Next Page
Loading...
Need help?
General