have exceeded their thresholds.
z
closed_Excl - The host is not accepting jobs until the exclusive job
running on it completes.
z
closed_Full - The host is not accepting new jobs. The configured
maximum number of jobs that can run on it has been reached.
z
closed_Wind - The host is not accepting jobs. The dispatch window that
has been defined for it is closed.
z
unlicensed - The host is not accepting jobs. It does not have a valid LSF
license for sbatchd and LIM is down.
z
closed_Lim - The LIM on the host is unreachable, but sbatchd is running.
z
unavail - The LIM on the host is not responding and sbatchd is down.
z
unreach - The sbatchd is down.
z
unreach - The sbatchd is down and LIM is unreachable
References:
z
3.7.8 How do I access the Clusterware Pro V5.1 Web Interface?
z
3.7.9 How do I access the Clusterware Pro V5.1 Command Line Interface?
Back to Top
1.7.2 Get an Overview of the Job Queue Status
Using the Clusterware Pro V5.1 Web Interface:
Select the Queues tab. An overview of available job queues is displayed. The following
details are displayed:
z
State - The state of the queue. Any queue with an "Open:Active" state
can accept new jobs.
z
Jobs Pending - The number of jobs pending in that queue.
z
Jobs Running - The number of jobs running in that queue.
z
Priority - The relative priority of the queue.
Using the Clusterware Pro V5.1 CLI:
From the CLI issue the following command.
% bqueues
By default bqueues returns the following information about all queues: queue name, queue
riority, queue status, job slot statistics, and job state statistics.
Additional information is available for all hosts in the cluster, or for a single hostname.
% bqueues -l
To Next Page
Loading...
Need help?
General