6. Remove the display assembly (3).
7. If it is necessary to replace the display panel or any of the display assembly internal components:
a. Remove the display bezel screw covers (1).
The screw covers are included in the Rubber Kits, spare part numbers 768019-001 (for use only on
computer models in natural silver finish) and 768018-001 (for use only on computer models in
vibrant red finish).
b. Remove the two Phillips PM1.9×3.0 screws (2) that secure the display panel to
the display assembly.
Display assembly 41
To Next Page
Loading...
Need help?
General
