ENWW Chapter 6 Removal and replacement 139
Tray 2 and 250-sheet feeder separation pad
1 Slide tray 2 or the media tray of a 250-sheet feeder out of the printer.
2 Press down the lift plate to lock it in place.
3 Use a flatblade screwdriver to press two tabs (callout 2), releasing the separation pad.
4 Slide the separation pad straight up and out of the tray.
Figure 64. Removing the tray 2 and 250-sheet feeder separation pad
2
2
2
1
To Next Page
Loading...