Reverse this procedure to install the solid-state drive.
Speakers
To remove the speakers, use this procedure and illustration.
Table 5-8 Speakers description and part number
Description Spare part number
Speakers (includes left and right speakers and cable) L24489-001
Before removing the speakers, follow these steps:
1. Prepare the computer for disassembly (see Preparation for disassembly on page 32).
2. Remove the rubber feet (see Computer feet on page 32).
3. Remove the bottom cover (see Bottom cover on page 33).
4. Remove the battery (see Battery on page 35).
To remove the speakers:
1. Disconnect the speaker cable from the system board (1).
2. Remove the tape (2) securing the cable.
Speakers 41
To Next Page
Loading...
