Removal and Replacement 7-5
3. Grasp the formed edge of the processor card (1 or 2 in Figure 7-3, with the rubber bumper), and
gently pull the card to unseat it from the system board and remove it from the cabinet.
Figure 7-3 Processor Card Location
4. Place the CPU card on an antistatic pad.
Replacement:
1. Align the Processor card in the appropriate slot (with the air guide and components toward the right
side of the card).
2. Insert the Processor card until it contacts the system card, then press firmly.
3. Replace the Processor/Memory cover plate.
2
1
1 — Processor 0
2 — Processor 1
To Next Page
Loading...
