SCSI and I/O 8-11
Table 8-10 provides the description for Hardware status byte 12: (ASC - Additional Sense Code) and
Hardware status byte 13: (ASCQ - Additional Sense Code Qualifier)
Table 8-10 Hardware Status Bytes 12 and 13
ASC ASCQ Description Notes
00 00 No additional sense information
00
00 Lengths did not Match on Read (Sense Key 0) 5
00
00 Undetermined Hardware Error (Sense Key 4) 5
00 01 File Mark detected
00 02 End of partition / medium detected
00 03 Setmark detected
00 04 Beginning of Partition Detected
00 05 End of data Detected
00 05 Write Mode and Read or Verify was Issued (sense key 5) 5
00 06 I/O Process Terminated 6
00 11 Audio Play Operation in Progress
00 12 Audio Play Operation Paused 6
00 13 Audio Play Operation Successfully Completed 6
00 14 Audio Play Operation Stopped Due to Error 6
00 15 No Current Audio Status to Return 6
01 00 No index/Sector signal
02 00 No seek complete
03 00 Write fault
03 01 No Write Current 4
03 02 Excessive Write Errors (sense key 3) 4, 5
04 00 Drive not ready
04 01 Drive in process of becoming ready
04 02 Drive not ready, initializing command required
04 03 Drive not ready, manual intervention required
04 04 Logical Unit Not Ready, Format in Progress 1
05 00 Logical Unit (LUN) does not respond to selection
07 00 Multiple peripheral devices selected
08 00 Logical unit communication Failure
08 01 Logical Unit Communication Time-Out (sense key 4) 1, 5
08 02 Logical Unit Communication Parity Error (sense key 4) 1, 5
09 00 Track Following Error
09 01 Tracking Servo Failure 6
09 02 Focus Servo Failure 6
09 03 Spindle Servo Failure 6
0C 00 Write Error 2, 4
To Next Page
Loading...
