8-12 SCSI and I/O
0C 00 LBOT Failure - Unable to write Tape mark Tracks (Sense Key 3) 5
0C 00 Hardware Failure - Head Sync Error during Write (Sense Key 4) 5
0C 01 Write Error Recovered with Auto-Reallocation 1
0A 00 Error log overflow
10 00 ID CRC or ECC error
10 00 Compression Integrity Check Failed (sense key B) 5
11 00 Unrecovered Read error of data blocks
11 00 Uncorrectable Block during Read, Space, Locate (Sense Key 3) 5
11 00 Hardware Error during Read (Sense Key 4) 5
11 01 Read Retries Exhausted 1, 4
11 01 An Uncorrectable Block was Encountered during a Read (sense key 3) 5
11 02 Error Too Long to Correct 1
11 02 Read Decompression CRC failed (sense key 4) 5
11 03 Too many permanent rad errors, can’t sync (sense key 11) 5
11 03 Multiple Read Errors 4
11 04 Physical End of Medium Encountered 4
11 05 LEC Uncorrectable Error 6
11 06 CIRC Unrecovered Error 6
11 0A Miscorrected Error 4
12 00 Address Mark Not Found For ID Field 1
14 00 No record found
14 00 Sector Not Found 1
14 00 A Medium Error was Detected during a Read, Space, Locate (sense key 3) 5
14 01 Record Not Found 1, 4
14 02 Filemark not Found 4
14 03 End of Data NOT Found 4
14 03 End of data found
14 04 Block Sequencer Error 4
15 00 Seek position error
15 00 Mechanical Positioning Error 2
15 00 No Information at this position on Tape, Cannot do Space Operation (sense key 3) 5
15 00 Random Positioning Error 6
15
01 Mechanical Positioning Error 1
15 01 Servo Hardware Failure 5
15 02 Positioning Error Detected by Read of Medium (sense key 9) 1, 4, 5
16 00 Data Synchronization Mark Error 1
17 00 Recovered Read data with retries (not with ECC)
17 01 Recovered Data with retries
Table 8-10 Hardware Status Bytes 12 and 13
ASC ASCQ Description Notes
To Next Page
Loading...
