8-14 SCSI and I/O
26 07 Transport full
26 08 Destination full
26 09 Source full
26 0A Exchange first destination full
26 0B Exchange first second destination full
26 98 Invalid Field Parameter - Check Sum 1
26 99 Invalid Field Parameter - Firmware Tag 1
27 00 Write protected
28 00 Not ready to ready transition/medium changed
28 01 Import/Export Element Accessed 2
29 00 Power On or Reset or Bus device reset occurred
29 80 Power On or Reset or Bus device reset occurred and selftest failed
2A 00 Mode select Parameters changed
2A 00 Parameters Changed (Mode Select) 1
2A 01 Mode Parameters Changed
2A 01 MODE SELECT Parameters changed by another Initiator 4
2A 02 Log Parameters Changed (sense key 7) 1, 4, 5
2B 00 Copy can’t execute since host can’t disconnect 2
2C 00 Command Sequence Error 3
2F 00 Commands Cleared by another Initiator 3
2F 00 Tagged Commands Changed by another Initiator 1
30 00 Incompatible medium installed
30 01 Cannot Read Medium - Unknown Format 4
30 01 Tape format is incompatible with the CXB-8505 (sense key 3) 5
30 02 Cannot read media, Incompatible format
30 03 Cleaning Cartridge Installed 2
31 00 Media Format Error Occurred
31 01 Format Failed 1
31 01 The format partition operation failed (sense key 3) 5
32 00 No defect spare location available
33 00 Spare Operation Failed
33 00 Tape Length Error 2
37 00 Parameter Rounded 1, 4
39 00 Saving Parameters Not Supported 4
3A 00 Medium not present
3B 00 Tape positioning error
3B 00 Sequential Positioning Error 2, 4
3B 01 Tape position error at Beginning Of Medium
Table 8-10 Hardware Status Bytes 12 and 13
ASC ASCQ Description Notes
To Next Page
Loading...
