HP 3000 9x9KS - Jumpering

8-24 SCSI and I/O
Jumpering
Figure 8-5 shows a bottom view of the drive for purposes of showing the jumper positions.
Figure 8-5. HP A3353A Jumper Diagram
Table 8-11 provides the definitions and default settings for jumpers J01, J4 and J5.
SCSI ID = 7
SCSI ID = 6
SCSI ID = 5
SCSI ID = 4
SCSI ID = 2
SCSI ID = 3
SCSI ID = 1
SCSI ID = 0
SCSI ID = 8
SCSI ID = 9
SCSI ID = 14
SCSI ID = 13
SCSI ID = 12
SCSI ID = 11
SCSI ID = 10
SCSI ID = 15
654321
Spindle Sync Cable Connector
Remote LED Connector
1234567
Posit ions
Ju pmer
Enable Drive Terminators
Reserved
Parity Disable
Enable Motor Start
Delay Motor Start
Write Protect
Reserved
J4
J4
Pin1
Pin2
Term Power to SCSI Bus
Pin1
Pin2
J1
Posit ions
Ju pmer
J5
Pin1
Pin2
Pin1
J5
Pin1
Pin1
Power
Connector
SCSI
Connector
Pin1
J01
J4
Pin1