Select To do this
Port Options NOTE: All port options are enabled by default.
●
Enable/disable the serial port (select models only).
●
Enable/disable the parallel port (select models only).
●
Enable/disable the flash media reader.
●
Enable/disable the USB port.
CAUTION: Disabling the USB port also disables
MultiBay devices and ExpressCard devices on the
advanced port replicator.
●
Enable/disable the 1394 port (select models only).
●
Enable/disable the ExpressCard slot (select models only).
●
Enable/disable the eSATA port (select models only).
AMT Options (select models only) NOTE: All AMT options are disabled by default.
●
Enable/disable firmware verbosity.
●
Enable/disable AMT setup prompt (Ctrl-P)
●
Enable/disable USB key provisioning support.
●
Enable/disable unconfigure AMT on next boot.
●
Select terminal emulation mode. Options include the
following:
◦
ANSI (default setting)
◦
VT100
●
Enable/disable firmware progress event support.
●
Enable/disable initiate Intel CIRA.
Set Security Level Change, view, or hide security levels for all BIOS menu items.
Restore Security Defaults Restore the default security settings.
Computer Setup in Windows
117
To Next Page
Loading...
Need help?
General