HP 325 - Notebook PC User Manual

3.
Release the ZIF connector (1) to which the TouchPad cable is connected, and then disconnect the
cable (2) from the system board.
4.
Remove the palm rest.
Remove the palm rest on 35.6-cm (14-in) or 33.8-cm (13.3-in) computers:
1. Position the computer upside down with the front toward you.
2. Remove the Torx M2.5×6.0 screw that secures the palm rest to the computer.
Component replacement procedures
71

HP 325 - Notebook PC Specifications

General

Brand	HP
Model	325 - Notebook PC
Category	Laptop
Language	English