EN Chapter 3 Printer operation 51
Settings and defaults
The printer makes most printing decisions based on either temporary settings or permanent defaults.
Note Settings sent from software applications override printer defaults.
Setting the display language
1 Press and hold S
ELECT
while turning on the printer. Hold S
ELECT
until
SELECT LANGUAGE
appears
on the control panel display.
2 Release S
ELECT
.
3 When
LANGUAGE=ENGLISH
appears on the display, press
– V
ALUE
+ until the language you want appears.
4 Press S
ELECT
to save your choice.
An asterisk (
*
) will appear beside the selected language.
5 Press G
O
to exit the menu.
Table 18. Settings and defaults
Setting or default Explanation
Temporary setting A value set for the current print job by the software
application. For example, a request from the software to
print three copies instead of the control panel default value
of one copy is a temporary setting. The printer continues to
use the temporary setting until it receives another software
request or until it is reset.
Control panel default A value set at the control panel when you select a menu
item. An asterisk appears, indicating the default setting.
The printer retains this default when it is turned off.
Factory default The value set for each menu item at the factory. Factory
defaults are listed in the item column in the menu tables
starting on page 52.
To Next Page
Loading...