EN Chapter 3 Printer operation 69
I/O menu
Items in the I/O (input/output) menu affect the communication between the printer and the computer.
Table 26. I/O menu
Item Values Explanation
PARALLEL ADV
COMMUNICATN=ON
ON
OFF
Turn the bidirectional parallel
communication on or off. The default is set
for a bidirectional parallel port (IEEE-1284).
This setting allows the printer to send
status readback messages to the
computer. (Turning on the parallel
advanced functions might slow language
switching.)
PARALLEL HIGH
SPEED=YES
YES
NO
Select the speed at which data is
transmitted to the printer.
YES
: The printer accepts faster parallel
communications used for connections with
newer computers.
NO
: The printer accepts slower parallel
communications used for connections with
older computers.
I/O TIMEOUT=15
SECONDS
5
to
300
SECONDS
Select the I/O timeout period in seconds.
(The I/O timeout refers to the time,
measured in seconds, that the printer waits
before ending a print job.)
This setting allows you to adjust timeout for
best performance. If data from other ports
appear in the middle of your print job,
increase the timeout value.
Press – V
ALUE
+ once to change settings by
increments of 1, or hold down – V
ALUE
+ to
scroll by increments of 10.
To Next Page
Loading...