HP 4100tn - LaserJet B/W Laser Printer - Page 72

70 Printer operation EN
EIO menu (networked printers)
The EIO (enhanced input/output) menu appears only when an EIO device is installed in an EIO slot
on the printer (such as an HP JetDirect print server). The items in the menu depend on the particular
accessory product installed. If the printer contains an HP JetDirect print server EIO card, you can
configure basic networking parameters using the EIO menu. These and other parameters can also
be configured through HP Web JetAdmin.
Table 27. EIO menu
Item Values Explanation
CFG NETWORK=NO NO
YES
Select whether or not you want to use
the HP JetDirect menu.
NO
: Bypass the HP JetDirect menu.
YES
: Use the HP JetDirect menu. You
must change this to
YES
each time you
want to use the menu.
Note
You must select
CFG NETWORK=YES
to
display the following items.
IPX/SPX=ON ON
OFF
Select whether the IPX/SPX protocol
stack (in Novell NetWare networks, for
example) is enabled (
ON
) or disabled
(
OFF
).
DLC/LLC=ON ON
OFF
Select whether the DLC/LLC protocol
stack is enabled (
ON
) or disabled (
OFF
).
TCP/IP=ON ON
OFF
Select whether the TCP/IP protocol
stack is enabled (
ON
) or disabled (
OFF
).
ATALK=ON ON
OFF
Select whether the Apple EtherTalk
protocol stack is enabled (
ON
) or disabled
(
OFF
).